Protected Enclosure Pressurization Warning Nameplates Compatible with all Type Y and Z Units.
|Dimensions||6 × 10 × 1 in|
Model EPWN Enclosure Pressurization Warning Nameplate
This nameplate is intended for all protected enclosures. One (1) nameplate is furnished with all Pressurization and Purging Units, but additional nameplates must be ordered separately at time of order to label all doors of the protected enclosure, as required by NFPA 496.
The Model EPWN nameplate is an essential accessory and required by NFPA 496 to ensure operators and maintenance personnel are advised that they must not open the protected enclosure while internal devices that are not suitable for use in the Hazardous Area are energized. To meet protected enclosure labeling requirements for both Class I and Class II, the warning also prescribes that all combustible dust must be removed from the protected enclosure and it must be properly purged or pressurized after it is opened, before re-energizing any internal devices that are not suitable for use in the Hazardous Area.
For more information on this nameplate and all accessories, please contact a Best Purging Systems Sales Associate
or click the technical bulletin tab above to view this nameplate’s detailed specifications.
This one page full color technical bulletin provides all essential information to make an informed purchasing decision. Beginning with a detailed description of the use and purpose of these code compliance protected enclosure warning labels, this bulletin also includes large images of both warning nameplates and complete material specifications.
Click either link below to review high or low resolution versions. You may then print or save it and easily share this comprehensive technical bulletin with your colleagues!
These documents will open in a separate window for your convenience.